Moved modules into a new Modules subdirectory. Started config of install.sh script. Moved home manager config out of flake.

modules/configuration.nix

@@ -0,0 +1,288 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+#Access Internet using:
+#nmcli device wifi list
+#nmcli device wifi connect <ssid> password <password>
+# or if no password (open wifi)
+#nmcli device wifi connect <ssid>
+
+#Nix flake file limit: ulimit -n 500000
+
+{ inputs, config, pkgs, lib, username, version, system, ... }:
+{
+#  stylix.enable = true;
+#  stylix.image = /etc/nixos/other/wallpaper.png;
+# in configuration.nix
+  #Assign Swap to the PC
+  #swapDevices = [{
+  #  device = "/swapfile";
+  #  size = 16 * 1024; # 16GB
+  #}];
+
+  imports =
+    [
+      inputs.home-manager.nixosModules.home-manager
+      ./hardware-configuration.nix
+    ];
+
+  specialisation = {
+    "plasma" = {
+      configuration = {
+        imports = [
+          ../plasma/plasma.nix
+        ];
+
+        programs.gamemode.enable = true;
+      };
+    };
+
+    "hyprland" = {
+      configuration = {
+        imports = [
+          ../hyprland/hyprland.nix
+        ];
+      };
+    };
+
+    #"minimal" = {
+    #  inheritParentConfig = false;
+    #  configuration = {
+    #    imports = [
+    #      ./minimal.nix
+    #    ];
+    #  };
+    #};
+
+ };
+
+  # Bootloader.
+  boot.loader = {
+    systemd-boot.enable = false;
+    efi.canTouchEfiVariables = true;
+    #boot.loader.efi.efiSysMountPoint = "/boot/efi";
+
+    grub = {
+      enable = true;
+      device = "/dev/nvme0n1";		#Needs to be changed when using a new computer! (Make grub partition - look below!)
+      #devices = [ "nodev" ];
+      efiSupport = true;
+      useOSProber = true;
+    };
+
+    grub2-theme = {
+	    enable = true;
+	    theme = "whitesur";
+	    footer = true;
+    };
+
+    timeout = 10;
+  };
+  
+  #Ensure there is a grub_bios partition: (gparted)
+  #Create a new parititon. File System: Unformatted - Size: ~5 Mib
+  #Apply
+  #Manage flags -> Add bios_grub
+
+  networking.hostName = "nixos";
+  # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  home-manager = {
+    useGlobalPkgs = true;
+    useUserPackages = true;
+    users.${username} = ./home.nix;
+    backupFileExtension = "backup";		# Automatically backs up conflicting files during activation
+    extraSpecialArgs = { inherit inputs username version system; };
+  };
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  networking.extraHosts = ''
+    100.89.141.79 tail-rpi
+  '';
+
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "de_DE.UTF-8";
+    LC_IDENTIFICATION = "de_DE.UTF-8";
+    LC_MEASUREMENT = "de_DE.UTF-8";
+    LC_MONETARY = "de_DE.UTF-8";
+    LC_NAME = "de_DE.UTF-8";
+    LC_NUMERIC = "de_DE.UTF-8";
+    LC_PAPER = "de_DE.UTF-8";
+    LC_TELEPHONE = "de_DE.UTF-8";
+    LC_TIME = "de_DE.UTF-8";
+  };
+  
+  # List services that you want to enable:
+  services = {
+    ollama = {
+      enable = true;
+      # Optional: load models on startup
+      #loadModels = [ ... ];
+    };
+
+    fprintd.enable = true;
+    fprintd.tod.enable = true;
+    fprintd.tod.driver = pkgs.libfprint-2-tod1-goodix;
+
+    fwupd.enable = true;   #Allows BIOS updates
+
+    locate = {
+      enable = true;
+      package = pkgs.plocate;
+    };
+
+    tailscale = {
+      enable = true;
+      useRoutingFeatures = "client";
+      extraSetFlags = [
+          "--operator=${username}"
+          "--accept-routes"
+      ];
+    };
+    
+    #Enable CUPS to print documents.
+    printing.enable = true;
+    
+    # Enable the OpenSSH daemon.
+    openssh.enable = true;
+  };
+
+  fonts.packages = with pkgs; [
+    font-awesome
+    nerd-fonts.jetbrains-mono
+    meslo-lgs-nf
+  ];
+
+  #In order for dynamically linked executables to work
+  programs.nix-ld.enable = true;
+
+  programs.ssh.askPassword = lib.mkForce "${pkgs.kdePackages.ksshaskpass}/bin/ksshaskpass";
+
+  programs.steam.enable = true;
+
+  # Configure console keymap
+  console.keyMap = "de";
+
+  hardware.enableRedistributableFirmware = true;
+  #Enables proprietary, redistributable firmware so hardware devices function properly
+
+  hardware.graphics = {
+    enable = true;
+    # Mesa should be enabled by default for Vulkan, but you can be explicit
+    enable32Bit = true; # For 32-bit applications
+  };
+
+  hardware.cpu.amd.updateMicrocode = true;
+
+  hardware.bluetooth = {
+    enable = true;
+    powerOnBoot = true;
+    settings = {
+      General = {
+        # Shows battery charge of connected devices on supported
+        # Bluetooth adapters. Defaults to 'false'.
+        Experimental = true;
+        # When enabled other devices can connect faster to us, however
+        # the tradeoff is increased power consumption. Defaults to
+        # 'false'.
+        FastConnectable = true;
+      };
+      Policy = {
+        # Enable all controllers when they are found. This includes
+        # adapters present on start as well as adapters that are plugged
+        # in later on. Defaults to 'true'.
+        AutoEnable = true;
+      };
+    };
+  };
+
+#  security.rtkit.enable = true;
+#  services.pipewire = {
+#    enable = true;
+#    alsa.enable = true;
+#    alsa.support32Bit = true;
+#    pulse.enable = true;
+#    # If you want to use JACK applications, uncomment this
+#    #jack.enable = true;
+#
+#    # use the example session manager (no others are packaged yet so this is enabled by default,
+#    # no need to redefine it in your config for now)
+#    #media-session.enable = true;
+#  };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users."{$username}" = {
+    isNormalUser = true;
+    description = "Cookiez";
+    extraGroups = [ "networkmanager" "wheel" "docker" ];
+    packages = with pkgs; [
+      #User Packages Here
+    ];
+  };
+
+  virtualisation.docker.enable = true;
+
+  environment.etc."gitconfig".text = ''
+    [init]
+      defaultBranch = main
+  '';
+
+  #So no user in the group Wheel has to input the password in order to use sudo
+  security.sudo.wheelNeedsPassword = false;  
+
+  #Allow Nix Commands
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
+  
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+  
+  environment.variables = {
+  	EDITOR = "nvim";
+  	# XKB_DEFAULT_LAYOUT = "de";
+  };
+
+  environment.sessionVariables = {
+    NIXOS_OZONE_WL = "1";   #For chromium to work under wayland and with virtual Keyboards (Only really needed for virtual keyboards, but doest hurt ...)
+    TERMINAL = "kitty";
+  };
+
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = version; # Did you read the comment?
+}